TEXAS CEDAR ROOT BURL
This crochet hook is made from TEXAS CEDAR ROOT BURL and your Choice of GABON EBONY, BLOODWOOD, TULIPWOOD or PURPLEHEART. This hook is shaped with a larger handle to relieve stress on the hand and wrist when crocheting. The hook has an Ergonomic shape that fits nicely in the hand.
The crochet hook measures 5 3/4" to 8" long depending on the size of the hook and is 3/4" to 1" in diameter at its widest.
General guidelines are sizes
Sizes K (6.5mm) and smaller are 5 3/4" to 6 1/4" long.
Sizes L (8mm to M (9mm) are 6 3/4" to 7 1/4" long.
Sizes N (10mm) and larger are 7 1/2" to 8" long.
Hooks with multiple woods tend to be to the longer side of these measurements. The reason for the variation is that each hooks is hand turned and while the standard shape, which gives the Ergonomic advantage, is maintained each hook is uniquely it's own.
You can request a specific length please contact me before ordering a custom length.
Because this hook is handcrafted there will be variation in appearance, grain and color. No two Hooks will be the same! Pictures are examples of what you will receive.
* indicates a required field
Gabon Ebony (Diospyrus Crassiflorais) a dense and heavy wood used for making a variety of items including musical instruments such as bagpipes, violin pegs, chessmen, buttons, handles for cutlery, and of course stick shafts and handles, for which a strong wood is a necessity. Ebony is one of the most difficult woods to carve given its hardness, and traditionally only master carvers were given the opportunity. Ebony trees are relatively small, and are found in the tropical rainforests of Africa, India, Ceylon, Malaysia, and Indonesia. The bark of ebony is tan and generally light in color, and the outer wood is a soft white. It is the inner portion of the tree that is fine-grained, dense, dark colored, strong and heavy, and has been prized for centuries.
Known for its jet-black color, ebony varies from deep black to dark red, with a variety of rich dark shades. Heartwood may display dramatic and irregular striping of bright brown, gray or greenish black on a deep black background. It is genetics that determines the shade, along with moisture, mineral content of the soil, and age/growth rate of the tree. Generally, the darker ebony is found at higher altitudes and from older trees. Ebony with more red tones has its origin at lower altitudes and from soil with greater iron content. Ebony is a scarce and costly wood.
Bloodwood (Brosimum rubescensalso) known as Satiné its heartwood has various shades of rich, lustrous gray-red to deep red with golden luster and variegated yellow and red stripes. The sapwood is yellowish-white and sharply demarcated from the heartwood. Texture is fine to coarse and the grain is straight. Bloodwood is very hard, strong and heavy.A burl results from a tree undergoing some form of stress. It may be caused by an injury, virus or fungus. Most burls grow beneath the ground, attached to the roots as a type of malignancy that is generally not discovered until the tree dies or falls over. Such burls sometimes appear as groups of bulbous protrusions connected by a system of rope-like roots. Almost all burl wood is covered by bark, even if it is underground. Insect infestation and certain types of mold infestation are the most common causes of this condition.
In some tree species, burls can grow to great size. The largest, at 26 ft, occur in coast redwoods and can encircle the entire trunk; when moisture is present, these burls can grow new redwood trees.
Burls yield a very peculiar and highly figured wood, prized for its beauty and rarity. It is sought after by furniture makers, artists, and wood sculptors. There are a number of well-known types of burls (each from a particular species); these are highly valued and sliced into veneers for furniture, inlay in doors, picture frames, household objects, automobile interior paneling and trim, musical instruments, and wood turning. The famous bird's eye maple of the sugar maple resembles the wood of a burl but is something else entirely. Burl wood is very hard to work with hand tools or on a lathe because its grain is twisted and interlocked, causing it to chip and shatter unpredictably. This "wild grain" makes burl wood extremely dense and resistant to splitting, which made it valued for bowls, mallets, mauls.